COMPANY HEADER
Print Back
Preprogrammed for standard control strategies.
Unit of Measure

Specifications

Brands

N/A Classic Automation Panelicity®

Configurations (Inputs/Outputs)

N/A 2 Analog Inputs 0-10V, 1-5V, 0-20 mA, 4-20 mA, PT100, J, K, T, S, B,R 2 Analog Outputs 0-10V, 1-5V, 0-20 mA, 4-20 mA 5 Digital Outputs Positive-Negative-Positive (PNP)

Warranty

N/A 2 year

Display Specifications

Display Type

N/A Touch-Screen Resistive, 4 Wires

Display Size

N/A 4.3 in

Display Orientation

N/A Vertical

Technical Specifications

Direct Current (DC) Power Supply Voltage

N/A 12 to 28 V

Current

N/A < 500 mA

Operating Temperature

N/A 32 to 131 ºF0 to 55 ºC

Storage Temperature

N/A -4 to 185 ºF-20 to 85 ºC

Non-Condensing Relative Humidity

N/A 5 to 95 %

Front Face Rating

N/A Ingress Protection (IP65) (Water Resistant)

Housing Material

N/A Acrylonitrile Butadiene Styrene (ABS) Polycarbonate

Universal Serial Bus (Micro-USB)

N/A Host 2.0

MODBUS Transmission Control Protocol (TCP)

N/A Master/Client (Standard Configuration Allows Slave Functionality)

Panel Cutout Width

N/A 2.65 in68 mm

Panel Cutout Height

N/A 5 in127 mm

Ethernet

N/A 10M/100Mbit/s - Auto Recognition Supports Patch or Crossover Cable

Approvals

N/A European Conformity (CE) Approved Underwriter's Laboratories (UL) Approval Pending

Controller Dimensions

Controller Width (Including Bezel)

N/A 3.15 in80 mm

Controller Height (Including Bezel)

N/A 6.14 in156 mm
Controller Depth (Including Bezel)1 N/A 1.46 in37 mm

Applications

Applications

N/A Panelicity® is easy to configure for most applications. We use standard control strategies suitable for most applications. Custom software is usually not required.

Typical applications for Panelicity® include:
  • Industrial temperature, pressure, flow, level control
  • Boiler combustion control
  • Boiler level and feed water flow control
  • Chemical liquid blending for paint, inks, dyes, etc.
  • Pressure control for critical control loops
  • Many others

Operator Interface

Operator Interface

N/A The Panelicity® displays feature intuitive icons for navigating menus compared to traditional 3x6 controllers. Typical setup parameters such as I/O types, ranges, and PID parameters are logically organized with no need to learn special software. Up to 5 alarms and 5 digital outputs can be defined for each control loop. Control templates have a data entry table to document your settings for back-up. Security access authority is provided to eliminate unauthorized field changes.

Accessories

Accessories

N/A Item # - CA-ACIN01
Description - 5 Double-Throw Relay Output Module

Item # - CA-CAB-11604
Description - Female A to Micro A-4 Cable

Item # - CA-TSVL 5-24-100
Description - 24 VDC Power Supply, 5 AMP

Item # - CA-TSVL 2-24-100
Description - 24 VDC Power Supply, 2 AMP

Item # - CA-BACKUP-DRIVE
Description - USB Flash Drive with CA Software, 8 GB"

Additional Information

Additional Information

N/A Reasons to Choose Panelicity®:
  • Easy Installation and Configuration
  • Intuitive Menu Options
  • Small Footprint
  • Low Total Cost
Cost Effective

Panelicity® saves you money. Simple, intuitive menus allow all entries from the display with minimal operator training.

Classic Automation provides the support you need with an industry leading 2-year warranty.

Technology
  • Full color touch screen with integrated PLC
  • Field proven hardware with an installed base of 6,000+ units around the world
  • Advanced features such as trending and alarm history
  • Secure backups on a USB flash drive
  • Implement one or multiple control loops with a single controlled
Easy Installation

The Panelicity® 3x6 controller extends less than 2 inches into the panel for use in areas with depth restrictions. Panel depth is 2.25 inches when an Ethernet cable is attached.

A simple cutout in your panel is all that is required to install Panelicity®.

The controller draws low power, consuming under 500 mA. The unit is slim and mounts easily. A 24V power supply is required and is available as an option when ordering.
  • 1 Depth is the depth behind the panel. An additional 0.25" is needed for use with Ethernet cable.